how to replace an igniter in a gas oven

Best answer


If your ignitordoesn’t glow when turning on the oven, you can replaceyour ignitorin about an hour with some basic hand tools. 1. Slide the ovenaway from the wall. Unplug the electrical plug from the outlet. 2. Turn off the gas at the gasvalve behind the oven by rotating the knob on the valve clockwise until it stops turning.

People also ask


  • How to replace an igniter on a gas stove?

  • Replacing the Igniter Step 1: Turn off power supply and gas supply Don鈥檛 take any steps to replace an igniter on a gas stove before making… Step 2: Remove grates, burner caps, and burner heads To access the igniter, you will need to open the up appliance. Step 3: Remove the cooktop The cooktop of …

  • What is an oven ignitor used for?

  • The oven ignitor, used in modern stoves, is used to open up the gas valves on the stove and then ignite the gas. The igniter draws upon an electrical current, heating up to a higher temperature and eventually glows.

  • How do I know if my oven igniter is working?

  • Here鈥檚 how to test the igniter: Turn the power to the oven back on by plugging it back in or turning the circuit breaker back on. You can now turn the gas supply to the oven on. Finally, attempt to start your gas oven. If your oven now ignites the new igniter is working correctly.

  • How do you replace the ignitor on a whirlpool oven?

  • If the ignitor wires are joined to the appliance wires with wire nuts, untwist the wire nuts to free the wires. Remove the two screws that hold the ignitor in place and pull the ignitor from the oven. Position the new ignitor in place, just like the old one.

    Leave a Reply

    Your email address will not be published.

    Related Post